Highland Shell
21449 Pacific Hwy S, Des Moines, WA 98198
Rated “Good” · as of Sep 9, 2026
Highland Shell was last inspected on September 9, 2026 and scored 30 points. Inspectors found 4 violations, 3 of them critical.
Latest inspection
September 9, 2026 · Routine Inspection/Field Review
Score: 30 points
3 critical1 general-
CriticalManagement & training5 pts
No person in charge who knew the food-safety rules, or no certified manager on staff.
Official wording (code 0100)
PIC present, demonstrates knowledge and performs duties to maintain AMC; certified manager on staff unless exempt
-
CriticalFood temperature10 pts
Cold food was held above 45°F.
Official wording (code 2110)
Proper cold holding temperatures; greater than 45 degrees Fahrenheit (F) (7 degrees Celsius (C))
-
CriticalHygiene & sanitation10 pts
Hand sinks were missing, blocked, or not stocked.
Official wording (code 0600)
Adequate handwashing facilities
-
GeneralFood handling5 pts
Wiping cloths weren’t stored in sanitizer, or sanitizer strength was wrong.
Official wording (code 3400)
Wiping cloths properly used, stored; sanitizer concentration
Inspection history
11 inspections on record
-
Satisfactory 0 points
Routine Inspection/Field Review
No violations
-
Unsatisfactory 10 points
Routine Inspection/Field Review
1 critical1 general Show violations
-
CriticalFood temperature5 pts
Cold food was held slightly too warm (42–45°F).
Official wording (code 2120)
Proper cold holding temperatures; between 42 to 45 degrees Fahrenheit (F) (6 to 7 degrees Celsius (C))
-
GeneralFood temperature5 pts
Not enough equipment to keep food at safe temperatures.
Official wording (code 2900)
Adequate equipment for temperature control
-
-
Satisfactory 5 points
Routine Inspection/Field Review
1 general Show violations
-
GeneralFood handling5 pts
Food wasn’t protected from contamination during delivery, prep, storage, or display.
Official wording (code 3300)
Potential food contamination prevented during delivery, preparation, storage, display
-
-
Satisfactory 5 points
Routine Inspection/Field Review
1 general Show violations
-
GeneralFood handling5 pts
Wiping cloths weren’t stored in sanitizer, or sanitizer strength was wrong.
Official wording (code 3400)
Wiping cloths properly used, stored; sanitizer concentration
-
-
Satisfactory 0 points
Return Inspection
No violations
-
Unsatisfactory 25 points
Return Inspection
1 critical Show violations
-
CriticalFood temperature25 pts
Hot food was held below 130°F.
Official wording (code 1710)
Proper hot holding temperatures; less than 130 degrees Fahrenheit (F) (54 degrees Celsius (C))
-
-
Unsatisfactory 25 points
Return Inspection
1 critical Show violations
-
CriticalFood temperature25 pts
Hot food was held below 130°F.
Official wording (code 1710)
Proper hot holding temperatures; less than 130 degrees Fahrenheit (F) (54 degrees Celsius (C))
-
-
Unsatisfactory 65 points
Routine Inspection/Field Review
5 critical1 general Show violations
-
CriticalManagement & training10 pts
Permit or required written food-safety procedures weren’t in order.
Official wording (code 2600)
Compliance with valid permit; operating and risk control plans, and required written procedures
-
CriticalFood temperature25 pts
Hot food was held below 130°F.
Official wording (code 1710)
Proper hot holding temperatures; less than 130 degrees Fahrenheit (F) (54 degrees Celsius (C))
-
CriticalFood temperature10 pts
Cold food was held above 45°F.
Official wording (code 2110)
Proper cold holding temperatures; greater than 45 degrees Fahrenheit (F) (7 degrees Celsius (C))
-
CriticalManagement & training5 pts
Not every food worker had a current Food Worker Card.
Official wording (code 0200)
Food Worker Cards current for all food workers; new food workers trained
-
CriticalHygiene & sanitation10 pts
Hand sinks were missing, blocked, or not stocked.
Official wording (code 0600)
Adequate handwashing facilities
-
GeneralFood handling5 pts
Wiping cloths weren’t stored in sanitizer, or sanitizer strength was wrong.
Official wording (code 3400)
Wiping cloths properly used, stored; sanitizer concentration
-
-
Unsatisfactory 33 points
Routine Inspection/Field Review
3 critical3 general Show violations
-
CriticalManagement & training5 pts
No person in charge who knew the food-safety rules, or no certified manager on staff.
Official wording (code 0100)
PIC present, demonstrates knowledge and performs duties to maintain AMC; certified manager on staff unless exempt
-
CriticalHygiene & sanitation10 pts
Hand sinks were missing, blocked, or not stocked.
Official wording (code 0600)
Adequate handwashing facilities
-
CriticalManagement & training5 pts
Not every food worker had a current Food Worker Card.
Official wording (code 0200)
Food Worker Cards current for all food workers; new food workers trained
-
GeneralFacility upkeep3 pts
Non-food surfaces were dirty or in poor repair.
Official wording (code 4300)
Nonfood-contact surfaces maintained and clean
-
GeneralFood handling5 pts
Wiping cloths weren’t stored in sanitizer, or sanitizer strength was wrong.
Official wording (code 3400)
Wiping cloths properly used, stored; sanitizer concentration
-
GeneralFacility upkeep5 pts
Surfaces or equipment were the wrong material or hard to clean.
Official wording (code 4000)
Food and nonfood surfaces properly used and constructed; cleanable
-
-
Unsatisfactory 35 points
Routine Inspection/Field Review
1 critical5 general1 paperwork Show violations
-
CriticalHygiene & sanitation10 pts
Hand sinks were missing, blocked, or not stocked.
Official wording (code 0600)
Adequate handwashing facilities
-
GeneralFacility upkeep3 pts
Non-food surfaces were dirty or in poor repair.
Official wording (code 4300)
Nonfood-contact surfaces maintained and clean
-
GeneralFacility upkeep5 pts
Food-contact surfaces weren’t kept clean and sanitized.
Official wording (code 4200)
Food-contact surfaces maintained, cleaned, sanitized
-
GeneralFacility upkeep5 pts
Plumbing problems, or missing protection against backflow.
Official wording (code 4400)
Plumbing properly sized, installed, and maintained; proper backflow devices, indirect drains, no cross-connections
-
GeneralFacility upkeep5 pts
Dishwashing setup or sanitizer strength wasn’t right, or test strips were missing.
Official wording (code 4100)
Warewashing facilities properly installed, maintained, used; sanitizer concentration; test strips available and used
-
GeneralFacility upkeep5 pts
Surfaces or equipment were the wrong material or hard to clean.
Official wording (code 4000)
Food and nonfood surfaces properly used and constructed; cleanable
-
PaperworkSigns & paperwork2 pts
Permit not posted.
Official wording (code 5000)
Posting of permit; mobile establishment name easily visible
-
More in Des Moines
Source: Public Health – Seattle & King County open data, refreshed hourly. Last inspection 8 weeks ago. Always confirm with the official record.