La Villa Mexican Food was last inspected on October 8, 2026 and scored 20 points. Inspectors found 3 violations, 2 of them critical.
Latest inspection
October 8, 2026 · Routine Inspection/Field Review
Score: 20 points
2 critical1 general-
CriticalFood handling10 pts
Unsafe or returned food wasn’t thrown out, or prepared food wasn’t date-marked.
Official wording (code 1100)
Proper disposition of returned, unsafe, or contaminated food; proper date marking procedures for food at high risk for Listeria
-
CriticalManagement & training5 pts
No person in charge who knew the food-safety rules, or no certified manager on staff.
Official wording (code 0100)
PIC present, demonstrates knowledge and performs duties to maintain AMC; certified manager on staff unless exempt
-
GeneralFacility upkeep5 pts
Plumbing problems, or missing protection against backflow.
Official wording (code 4400)
Plumbing properly sized, installed, and maintained; proper backflow devices, indirect drains, no cross-connections
Inspection history
11 inspections on record
-
Complete 0 points
Educational Inspection
No violations
-
Unsatisfactory 10 points
Routine Inspection/Field Review
2 critical Show violations
-
CriticalFood temperature5 pts
Cold food was held slightly too warm (42–45°F).
Official wording (code 2120)
Proper cold holding temperatures; between 42 to 45 degrees Fahrenheit (F) (6 to 7 degrees Celsius (C))
-
CriticalManagement & training5 pts
No person in charge who knew the food-safety rules, or no certified manager on staff.
Official wording (code 0100)
PIC present, demonstrates knowledge and performs duties to maintain AMC; certified manager on staff unless exempt
-
-
Unsatisfactory 15 points
Routine Inspection/Field Review
2 critical Show violations
-
CriticalFood temperature5 pts
Cold food was held slightly too warm (42–45°F).
Official wording (code 2120)
Proper cold holding temperatures; between 42 to 45 degrees Fahrenheit (F) (6 to 7 degrees Celsius (C))
-
CriticalManagement & training10 pts
Permit or required written food-safety procedures weren’t in order.
Official wording (code 2600)
Compliance with valid permit; operating and risk control plans, and required written procedures
-
-
Satisfactory 8 points
Routine Inspection/Field Review
2 general Show violations
-
GeneralFacility upkeep5 pts
Food-contact surfaces weren’t kept clean and sanitized.
Official wording (code 4200)
Food-contact surfaces maintained, cleaned, sanitized
-
GeneralFacility upkeep3 pts
Non-food surfaces were dirty or in poor repair.
Official wording (code 4300)
Nonfood-contact surfaces maintained and clean
-
-
Unsatisfactory 15 points
Routine Inspection/Field Review
2 critical Show violations
-
CriticalFood temperature5 pts
No accurate thermometer to check food temperatures.
Official wording (code 2200)
Accurate thermometer provided and used to evaluate temperature of TCS foods
-
CriticalHygiene & sanitation10 pts
Hand sinks were missing, blocked, or not stocked.
Official wording (code 0600)
Adequate handwashing facilities
-
-
Unsatisfactory 30 points
Routine Inspection/Field Review
2 critical2 general Show violations
-
CriticalFood handling10 pts
Toxic chemicals weren’t labeled, stored, or used safely.
Official wording (code 2500)
Toxic substances properly identified, stored, used
-
CriticalHygiene & sanitation10 pts
Hand sinks were missing, blocked, or not stocked.
Official wording (code 0600)
Adequate handwashing facilities
-
GeneralFood handling5 pts
Wiping cloths weren’t stored in sanitizer, or sanitizer strength was wrong.
Official wording (code 3400)
Wiping cloths properly used, stored; sanitizer concentration
-
GeneralFacility upkeep5 pts
Dishwashing setup or sanitizer strength wasn’t right, or test strips were missing.
Official wording (code 4100)
Warewashing facilities properly installed, maintained, used; sanitizer concentration; test strips available and used
-
-
Unsatisfactory 15 points
Routine Inspection/Field Review
1 critical1 general Show violations
-
CriticalHygiene & sanitation10 pts
Hand sinks were missing, blocked, or not stocked.
Official wording (code 0600)
Adequate handwashing facilities
-
GeneralFacility upkeep5 pts
Dishwashing setup or sanitizer strength wasn’t right, or test strips were missing.
Official wording (code 4100)
Warewashing facilities properly installed, maintained, used; sanitizer concentration; test strips available and used
-
-
Satisfactory 7 points
Routine Inspection/Field Review
1 general1 paperwork Show violations
-
GeneralFacility upkeep5 pts
Dishwashing setup or sanitizer strength wasn’t right, or test strips were missing.
Official wording (code 4100)
Warewashing facilities properly installed, maintained, used; sanitizer concentration; test strips available and used
-
PaperworkSigns & paperwork2 pts
Permit not posted.
Official wording (code 5000)
Posting of permit; mobile establishment name easily visible
-
-
Unsatisfactory 30 points
Routine Inspection/Field Review
1 critical1 general Show violations
-
CriticalFood temperature25 pts
Cooked food wasn’t cooled properly.
Official wording (code 1600)
Proper cooling procedure
-
GeneralFood handling5 pts
Wiping cloths weren’t stored in sanitizer, or sanitizer strength was wrong.
Official wording (code 3400)
Wiping cloths properly used, stored; sanitizer concentration
-
-
Satisfactory 0 points
Routine Inspection/Field Review
No violations
More in Seattle
Source: Public Health – Seattle & King County open data, refreshed hourly. Last inspection 4 weeks ago. Always confirm with the official record.