–

Bay Bubble Tea & Juice Corner

8776 Bay Parkway, Brooklyn, NY 11214

Coffee/Tea Bath Beach (347) 371-9484

Not yet graded

Bay Bubble Tea & Juice Corner was last inspected on August 5, 2026 and scored 18 points (B range). Inspectors found 4 violations, 2 of them critical, including signs of pests.

Latest inspection

August 5, 2026 · Cycle Inspection · Initial Inspection

18

Score: 18 points (B range)

2 critical2 general
  • CriticalFood temperature

    Hot food was being held below 140°F, where bacteria can grow.

    Official wording (code 02B)

    Hot TCS food item not held at or above 140 °F.

  • CriticalPests

    Live roaches were found.

    Official wording (code 04M)

    Live roaches in facility's food or non-food area.

  • GeneralPests

    The building wasn’t pest-proofed: gaps, holes, or clutter that let rodents or insects in or give them shelter.

    Official wording (code 08A)

    Establishment is not free of harborage or conditions conducive to rodents, insects or other pests.

  • GeneralFacility upkeep

    Plumbing was missing protection against backflow, or floors didn’t drain properly.

    Official wording (code 10B)

    Anti-siphonage or back-flow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly. Condensation or liquid waste improperly disposed of.

ABFeb 18, 2025: 444425/02Apr 8, 2025: 8825/04Aug 5, 2026: 181826/08
Inspection scores over time. Lower is better: 0–13 is an A, 14–27 a B, 28 or more a C.

Inspection history

3 inspections on record

  1. 8 8 points (A range)

    Pre-permit (Non-operational) · Re-inspection

    1 critical1 general Show violations
    • CriticalFood handling

      No working thermometer was available to check food temperatures.

      Official wording (code 04J)

      Properly scaled and calibrated thermometer or thermocouple not provided or not readily accessible in food preparation and hot/cold holding areas to measure temperatures of TCS foods during cooking, cooling, reheating, and holding.

    • GeneralFacility upkeep

      Plumbing was missing protection against backflow, or floors didn’t drain properly.

      Official wording (code 10B)

      Anti-siphonage or back-flow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly. Condensation or liquid waste improperly disposed of.

  2. 44 44 points (C range)

    Pre-permit (Non-operational) · Initial Inspection

    Scored in the C range on an initial inspection, so no grade is given yet. A re-inspection follows.

    3 critical3 general Show violations
    • CriticalFacility

      Food-contact equipment or containers were made of unsuitable material or badly maintained.

      Official wording (code 05C)

      Food contact surface, refillable, reusable containers, or equipment improperly constructed, placed or maintained. Unacceptable material used. Culinary sink or other acceptable method not provided for washing food.

    • CriticalHygiene & sanitation

      Food or supplies weren’t protected from contamination during storage, prep, or service.

      Official wording (code 06C)

      Food, supplies, or equipment not protected from potential source of contamination during storage, preparation, transportation, display, service or from customer’s refillable, reusable container. Condiments not in single-service containers or dispensed directly by the vendor.

    • CriticalFood handling

      No working thermometer was available to check food temperatures.

      Official wording (code 04J)

      Properly scaled and calibrated thermometer or thermocouple not provided or not readily accessible in food preparation and hot/cold holding areas to measure temperatures of TCS foods during cooking, cooling, reheating, and holding.

    • GeneralFacility upkeep

      Fridges or hot-holding units lacked an accurate thermometer.

      Official wording (code 10E)

      Accurate thermometer not provided or properly located in refrigerated, cold storage or hot holding equipment

    • GeneralFacility upkeep

      Ventilation was missing or broken, letting grease, heat, or fumes build up.

      Official wording (code 10D)

      Mechanical or natural ventilation not provided, inadequate, improperly installed, in disrepair or fails to prevent and control excessive build-up of grease, heat, steam condensation, vapors, odors, smoke or fumes.

    • GeneralFacility upkeep

      Plumbing was missing protection against backflow, or floors didn’t drain properly.

      Official wording (code 10B)

      Anti-siphonage or back-flow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly. Condensation or liquid waste improperly disposed of.

More in Bath Beach

Source: NYC Department of Health and Mental Hygiene (DOHMH) open data, refreshed hourly. Last inspection 3 months ago. Always confirm with the official record.