GP

Mala Project

603 Manhattan Avenue, Brooklyn, NY 11222

Chinese Greenpoint (718) 500-3881

Grade Pending · as of May 20, 2026

Mala Project was last inspected on May 20, 2026 and scored 25 points (B range). Inspectors found 4 violations, 3 of them critical.

Latest inspection

May 20, 2026 · Cycle Inspection · Re-inspection

GP

Score: 25 points (B range)

3 critical1 general
  • CriticalFood temperature

    Food made from room-temperature ingredients wasn’t chilled quickly enough.

    Official wording (code 02I)

    TCS food removed from cold holding or prepared from or combined with ingredients at room temperature not cooled by an approved method to 41 °F or below within 4 hours.

  • CriticalFood handling

    No one supervising the kitchen held a Food Protection Certificate.

    Official wording (code 04A)

    Food Protection Certificate (FPC) not held by manager or supervisor of food operations.

  • CriticalFood temperature

    Hot food was being held below 140°F, where bacteria can grow.

    Official wording (code 02B)

    Hot TCS food item not held at or above 140 °F.

  • GeneralFood handling

    Frozen food was being thawed the wrong way.

    Official wording (code 09B)

    Thawing procedure improper.

ABJul 31, 2023: 131323/07Mar 3, 2025: 171725/03Aug 14, 2025: 131325/08Nov 6, 2025: 353525/11May 20, 2026: 252526/05
Inspection scores over time. Lower is better: 0–13 is an A, 14–27 a B, 28 or more a C.

Inspection history

5 inspections on record

  1. 35 35 points (C range)

    Cycle Inspection · Initial Inspection

    Scored in the C range on an initial inspection, so no grade is given yet. A re-inspection follows.

    3 critical4 general Show violations
    • CriticalFood temperature

      Cold food was kept warmer than 41°F, where bacteria can grow.

      Official wording (code 02G)

      Cold TCS food item held above 41 °F; smoked or processed fish held above 38 °F; intact raw eggs held above 45 °F; or reduced oxygen packaged (ROP) TCS foods held above required temperatures except during active necessary preparation.

    • CriticalHygiene & sanitation

      Food or supplies weren’t protected from contamination during storage, prep, or service.

      Official wording (code 06C)

      Food, supplies, or equipment not protected from potential source of contamination during storage, preparation, transportation, display, service or from customer’s refillable, reusable container. Condiments not in single-service containers or dispensed directly by the vendor.

    • CriticalFood temperature

      Hot food was being held below 140°F, where bacteria can grow.

      Official wording (code 02B)

      Hot TCS food item not held at or above 140 °F.

    • GeneralFacility upkeep

      Non-food surfaces or equipment were dirty, damaged, or made of unsuitable material.

      Official wording (code 10F)

      Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.

    • GeneralFood handling

      Food-contact surfaces were in poor repair.

      Official wording (code 09C)

      Design, construction, materials used or maintenance of food contact surface improper. Surface not easily cleanable, sanitized and maintained.

    • GeneralFacility upkeep

      Non-food surfaces or equipment were poorly built or maintained.

      Official wording (code 10G)

      Dishwashing and ware washing: Cleaning and sanitizing of tableware, including dishes, utensils, and equipment deficient.

    • GeneralFood handling

      Frozen food was being thawed the wrong way.

      Official wording (code 09B)

      Thawing procedure improper.

  2. A 13 points (A range)

    Cycle Inspection · Re-inspection

    1 critical2 general Show violations
    • CriticalHygiene & sanitation

      Surfaces that touch food weren’t properly washed and sanitized.

      Official wording (code 06D)

      Food contact surface not properly washed, rinsed and sanitized after each use and following any activity when contamination may have occurred.

    • GeneralFacility upkeep

      Non-food surfaces or equipment were poorly built or maintained.

      Official wording (code 10G)

      Dishwashing and ware washing: Cleaning and sanitizing of tableware, including dishes, utensils, and equipment deficient.

    • GeneralFacility upkeep

      Non-food surfaces or equipment were dirty, damaged, or made of unsuitable material.

      Official wording (code 10F)

      Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.

  3. 17 17 points (B range)

    Cycle Inspection · Initial Inspection

    Scored in the B range on an initial inspection, so no grade is given yet. A re-inspection follows.

    3 critical1 general Show violations
    • CriticalHygiene & sanitation

      Surfaces that touch food weren’t properly washed and sanitized.

      Official wording (code 06D)

      Food contact surface not properly washed, rinsed and sanitized after each use and following any activity when contamination may have occurred.

    • CriticalHygiene & sanitation

      Clean utensils or equipment were stored or handled in a way that could contaminate them.

      Official wording (code 06E)

      Sanitized equipment or utensil, including in-use food dispensing utensil, improperly used or stored.

    • CriticalHygiene & sanitation

      Food or supplies weren’t protected from contamination during storage, prep, or service.

      Official wording (code 06C)

      Food, supplies, or equipment not protected from potential source of contamination during storage, preparation, transportation, display, service or from customer’s refillable, reusable container. Condiments not in single-service containers or dispensed directly by the vendor.

    • GeneralFacility upkeep

      Ventilation was missing or broken, letting grease, heat, or fumes build up.

      Official wording (code 10D)

      Mechanical or natural ventilation not provided, inadequate, improperly installed, in disrepair or fails to prevent and control excessive build-up of grease, heat, steam condensation, vapors, odors, smoke or fumes.

  4. A 13 points (A range)

    Pre-permit (Operational) · Initial Inspection

    1 critical3 general Show violations
    • CriticalPests

      Live roaches were found.

      Official wording (code 04M)

      Live roaches in facility's food or non-food area.

    • GeneralFacility upkeep

      Non-food surfaces or equipment were dirty, damaged, or made of unsuitable material.

      Official wording (code 10F)

      Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.

    • GeneralPests

      The building wasn’t pest-proofed: gaps, holes, or clutter that let rodents or insects in or give them shelter.

      Official wording (code 08A)

      Establishment is not free of harborage or conditions conducive to rodents, insects or other pests.

    • GeneralFood handling

      Food-contact surfaces were in poor repair.

      Official wording (code 09C)

      Design, construction, materials used or maintenance of food contact surface improper. Surface not easily cleanable, sanitized and maintained.

More in Greenpoint

Source: NYC Department of Health and Mental Hygiene (DOHMH) open data, refreshed hourly. Last inspection 6 months ago. Always confirm with the official record.