Burger Urway
1846 East New York Avenue, Brooklyn, NY 11207
Hamburgers East New York (Pennsylvania Ave) (347) 663-2315
Grade B · as of May 2, 2019
Burger Urway was last inspected on November 20, 2019 with a result of “Violations were cited in the following area(s)”. Inspectors found 2 violations.
Latest inspection
November 20, 2019 · Administrative Miscellaneous · Initial Inspection
Result: Violations were cited in the following area(s)
2 paperwork-
PaperworkSigns & paperwork
Failure to comply with an Order of the Board of Health, Commissioner, or Department.
-
PaperworkSigns & paperwork
Notice of the Department of Board of Health mutilated, obstructed, or removed.
Inspection history
9 inspections on record
-
B 22 points (B range)
Cycle Inspection · Re-inspection
2 critical2 general Show violations
-
CriticalFood handling
No working thermometer was available to check food temperatures.
Official wording (code 04J)
Appropriately scaled metal stem-type thermometer or thermocouple not provided or used to evaluate temperatures of potentially hazardous foods during cooking, cooling, reheating and holding.
-
CriticalPests
Live roaches were found.
Official wording (code 04M)
Live roaches present in facility's food and/or non-food areas.
-
GeneralFacility upkeep
Single-use items (cups, utensils, containers) were missing, reused, or left unprotected.
Official wording (code 10H)
Proper sanitization not provided for utensil ware washing operation.
-
GeneralPests
The building wasn’t pest-proofed: gaps, holes, or clutter that let rodents or insects in or give them shelter.
Official wording (code 08A)
Facility not vermin proof. Harborage or conditions conducive to attracting vermin to the premises and/or allowing vermin to exist.
-
-
20 20 points (B range)
Cycle Inspection · Initial Inspection
Scored in the B range on an initial inspection, so no grade is given yet. A re-inspection follows.
2 critical1 general Show violations
-
CriticalFood handling
No one supervising the kitchen held a Food Protection Certificate.
Official wording (code 04A)
Food Protection Certificate not held by supervisor of food operations.
-
CriticalPests
Mice, or signs of mice, were found.
Official wording (code 04L)
Evidence of mice or live mice present in facility's food and/or non-food areas.
-
GeneralPests
The building wasn’t pest-proofed: gaps, holes, or clutter that let rodents or insects in or give them shelter.
Official wording (code 08A)
Facility not vermin proof. Harborage or conditions conducive to attracting vermin to the premises and/or allowing vermin to exist.
-
-
A 13 points (A range)
Cycle Inspection · Re-inspection
1 critical2 general Show violations
-
CriticalPests
Flies or other nuisance pests were found.
Official wording (code 04N)
Filth flies or food/refuse/sewage-associated (FRSA) flies present in facility’s food and/or non-food areas. Filth flies include house flies, little house flies, blow flies, bottle flies and flesh flies. Food/refuse/sewage-associated flies include fruit flies, drain flies and Phorid flies.
-
GeneralFacility upkeep
Non-food surfaces or equipment were dirty, damaged, or made of unsuitable material.
Official wording (code 10F)
Non-food contact surface improperly constructed. Unacceptable material used. Non-food contact surface or equipment improperly maintained and/or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
-
GeneralPests
The building wasn’t pest-proofed: gaps, holes, or clutter that let rodents or insects in or give them shelter.
Official wording (code 08A)
Facility not vermin proof. Harborage or conditions conducive to attracting vermin to the premises and/or allowing vermin to exist.
-
-
42 42 points (C range)
Cycle Inspection · Initial Inspection
Scored in the C range on an initial inspection, so no grade is given yet. A re-inspection follows.
4 critical3 general Show violations
-
CriticalFood temperature
Cooked food wasn’t cooled down quickly enough.
Official wording (code 02H)
Food not cooled by an approved method whereby the internal product temperature is reduced from 140º F to 70º F or less within 2 hours, and from 70º F to 41º F or less within 4 additional hours.
-
CriticalFood handling
No one supervising the kitchen held a Food Protection Certificate.
Official wording (code 04A)
Food Protection Certificate not held by supervisor of food operations.
-
CriticalPests
Flies or other nuisance pests were found.
Official wording (code 04N)
Filth flies or food/refuse/sewage-associated (FRSA) flies present in facility’s food and/or non-food areas. Filth flies include house flies, little house flies, blow flies, bottle flies and flesh flies. Food/refuse/sewage-associated flies include fruit flies, drain flies and Phorid flies.
-
CriticalFood handling
No working thermometer was available to check food temperatures.
Official wording (code 04J)
Appropriately scaled metal stem-type thermometer or thermocouple not provided or used to evaluate temperatures of potentially hazardous foods during cooking, cooling, reheating and holding.
-
GeneralFood handling
Frozen food was being thawed the wrong way.
Official wording (code 09B)
Thawing procedures improper.
-
GeneralPests
The building wasn’t pest-proofed: gaps, holes, or clutter that let rodents or insects in or give them shelter.
Official wording (code 08A)
Facility not vermin proof. Harborage or conditions conducive to attracting vermin to the premises and/or allowing vermin to exist.
-
GeneralFacility upkeep
Non-food surfaces or equipment were dirty, damaged, or made of unsuitable material.
Official wording (code 10F)
Non-food contact surface improperly constructed. Unacceptable material used. Non-food contact surface or equipment improperly maintained and/or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
-
-
–
Administrative Miscellaneous · Initial Inspection · Violations were cited in the following area(s)
1 paperwork Show violations
-
PaperworkSigns & paperwork
Permit not conspicuously displayed.
-
-
A 7 points (A range)
Cycle Inspection · Re-inspection
1 critical1 general Show violations
-
CriticalHygiene & sanitation
Surfaces that touch food weren’t properly washed and sanitized.
Official wording (code 06D)
Food contact surface not properly washed, rinsed and sanitized after each use and following any activity when contamination may have occurred.
-
GeneralFacility upkeep
Non-food surfaces or equipment were dirty, damaged, or made of unsuitable material.
Official wording (code 10F)
Non-food contact surface improperly constructed. Unacceptable material used. Non-food contact surface or equipment improperly maintained and/or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
-
-
34 34 points (C range)
Cycle Inspection · Initial Inspection
Scored in the C range on an initial inspection, so no grade is given yet. A re-inspection follows.
4 critical2 general1 paperwork Show violations
-
CriticalFood temperature
Previously cooked food wasn’t reheated to 165°F before being served hot.
Official wording (code 02C)
Hot food item that has been cooked and refrigerated is being held for service without first being reheated to 165º F or above within 2 hours.
-
CriticalHygiene & sanitation
Clean utensils or equipment were stored or handled in a way that could contaminate them.
Official wording (code 06E)
Sanitized equipment or utensil, including in-use food dispensing utensil, improperly used or stored.
-
CriticalHygiene & sanitation
Surfaces that touch food weren’t properly washed and sanitized.
Official wording (code 06D)
Food contact surface not properly washed, rinsed and sanitized after each use and following any activity when contamination may have occurred.
-
CriticalFood handling
No one supervising the kitchen held a Food Protection Certificate.
Official wording (code 04A)
Food Protection Certificate not held by supervisor of food operations.
-
GeneralFacility upkeep
Single-use items (cups, utensils, containers) were missing, reused, or left unprotected.
Official wording (code 10H)
Proper sanitization not provided for utensil ware washing operation.
-
GeneralFood handling
Food-contact surfaces were in poor repair.
Official wording (code 09C)
Food contact surface not properly maintained.
-
PaperworkSigns & paperwork
MISBRANDED AND LABELING
-
-
A 10 points (A range)
Pre-permit (Operational) · Initial Inspection
1 critical1 general Show violations
-
CriticalFood handling
No working thermometer was available to check food temperatures.
Official wording (code 04J)
Appropriately scaled metal stem-type thermometer or thermocouple not provided or used to evaluate temperatures of potentially hazardous foods during cooking, cooling, reheating and holding.
-
GeneralFacility upkeep
Non-food surfaces or equipment were dirty, damaged, or made of unsuitable material.
Official wording (code 10F)
Non-food contact surface improperly constructed. Unacceptable material used. Non-food contact surface or equipment improperly maintained and/or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
-
More in East New York (Pennsylvania Ave)
Source: NYC Department of Health and Mental Hygiene (DOHMH) open data, refreshed hourly. Last inspection 7 years ago. Always confirm with the official record.