Taiwan Pork Chop House
3 Doyers Street, Manhattan, NY 10013
Chinese Chinatown (212) 791-7007
Grade A · as of Nov 18, 2024
Taiwan Pork Chop House was last inspected on July 31, 2026 and scored 26 points (B range). Inspectors found 5 violations, 2 of them critical.
Latest inspection
July 31, 2026 · Cycle Inspection · Initial Inspection
Score: 26 points (B range)
2 critical3 generalScored in the B range on an initial inspection, so no grade is given yet. A re-inspection follows.
-
CriticalFood temperature
Hot food was being held below 140°F, where bacteria can grow.
Official wording (code 02B)
Hot TCS food item not held at or above 140 °F.
-
CriticalFood temperature
Food wasn’t cooked to a safe internal temperature.
Official wording (code 02A)
Time/Temperature Control for Safety (TCS) food not cooked to required minimum internal temperature. • Poultry, poultry parts, ground and comminuted poultry, all stuffing containing poultry, meats, fish or ratites to or above 165 °F for 15 seconds with no interruption of the cooking process • Ground meat, and food containing ground and comminuted meat, to or above 158 °F for 15 seconds with no interruption of the cooking process, except per individual customer request • Pork, any food containing pork to or above 150 °F for 15 seconds • Mechanically tenderized or injected meats to or above 155 °F. • Whole meat roasts and beef steak to or above required temperature and time except per individual customer request • Raw animal foods cooked in microwave to or above165 °F, covered, rotated or stirred • All other foods to or above 140 °F for 15 seconds; shell eggs to or above 145 °F for 15 seconds except per individual customer request.
-
GeneralFood handling
Damaged cans weren’t separated from good stock and labeled for return.
Official wording (code 09A)
Swollen, leaking, rusted or otherwise damaged canned food to be returned to distributor not segregated from intact product and clearly labeled DO NOT USE
-
GeneralFacility upkeep
Non-food surfaces or equipment were poorly built or maintained.
Official wording (code 10G)
Dishwashing and ware washing: Cleaning and sanitizing of tableware, including dishes, utensils, and equipment deficient.
-
GeneralFood handling
Food-contact surfaces were in poor repair.
Official wording (code 09C)
Design, construction, materials used or maintenance of food contact surface improper. Surface not easily cleanable, sanitized and maintained.
Inspection history
4 inspections on record
-
A 4 points (A range)
Cycle Inspection · Re-inspection
2 general Show violations
-
GeneralFacility upkeep
Plumbing was missing protection against backflow, or floors didn’t drain properly.
Official wording (code 10B)
Anti-siphonage or back-flow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly. Condensation or liquid waste improperly disposed of.
-
GeneralFacility upkeep
Non-food surfaces or equipment were dirty, damaged, or made of unsuitable material.
Official wording (code 10F)
Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
-
-
24 24 points (B range)
Cycle Inspection · Initial Inspection
Scored in the B range on an initial inspection, so no grade is given yet. A re-inspection follows.
3 critical3 general Show violations
-
CriticalPests
Mice, or signs of mice, were found.
Official wording (code 04L)
Evidence of mice or live mice in establishment's food or non-food areas.
-
CriticalHygiene & sanitation
Food or supplies weren’t protected from contamination during storage, prep, or service.
Official wording (code 06C)
Food, supplies, or equipment not protected from potential source of contamination during storage, preparation, transportation, display, service or from customer’s refillable, reusable container. Condiments not in single-service containers or dispensed directly by the vendor.
-
CriticalHygiene & sanitation
Surfaces that touch food weren’t properly washed and sanitized.
Official wording (code 06D)
Food contact surface not properly washed, rinsed and sanitized after each use and following any activity when contamination may have occurred.
-
GeneralPests
The building wasn’t pest-proofed: gaps, holes, or clutter that let rodents or insects in or give them shelter.
Official wording (code 08A)
Establishment is not free of harborage or conditions conducive to rodents, insects or other pests.
-
GeneralFacility upkeep
Non-food surfaces or equipment were dirty, damaged, or made of unsuitable material.
Official wording (code 10F)
Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
-
GeneralFacility upkeep
Plumbing was missing protection against backflow, or floors didn’t drain properly.
Official wording (code 10B)
Anti-siphonage or back-flow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly. Condensation or liquid waste improperly disposed of.
-
-
–
Administrative Miscellaneous · Initial Inspection · Violations were cited in the following area(s)
1 paperwork Show violations
-
PaperworkSigns & paperwork
Required healthy-eating information wasn’t posted.
Official wording (code 20-08)
Failure to post or conspicuously post healthy eating information
-
More in Chinatown
Source: NYC Department of Health and Mental Hygiene (DOHMH) open data, refreshed hourly. Last inspection 3 months ago. Always confirm with the official record.