Jones Wood Foundry
401 East 76 Street, Manhattan, NY 10021
English Lenox Hill-Roosevelt Island (212) 249-2700
Grade A · as of Oct 17, 2024
Jones Wood Foundry was last inspected on May 21, 2026 and scored 56 points (C range). Inspectors found 9 violations, 5 of them critical.
Latest inspection
May 21, 2026 · Cycle Inspection · Initial Inspection
Score: 56 points (C range)
5 critical4 generalScored in the C range on an initial inspection, so no grade is given yet. A re-inspection follows.
-
CriticalFacility
Not enough refrigeration or hot-holding equipment to keep food at safe temperatures.
Official wording (code 05F)
Insufficient or no hot holding, cold storage or cold holding equipment provided to maintain Time/Temperature Control for Safety Foods (TCS) at required temperatures
-
CriticalFood handling
Food was contaminated or cross-contaminated, or wasn’t thrown out when it should have been.
Official wording (code 04H)
Raw, cooked or prepared food is adulterated, contaminated, cross-contaminated, or not discarded in accordance with HACCP plan.
-
CriticalFood temperature
Hot food was being held below 140°F, where bacteria can grow.
Official wording (code 02B)
Hot TCS food item not held at or above 140 °F.
-
CriticalFood temperature
Cooked food wasn’t cooled down quickly enough.
Official wording (code 02H)
After cooking or removal from hot holding, TCS food not cooled by an approved method whereby the internal temperature is reduced from 140 °F to 70 °F or less within 2 hours, and from 70 °F to 41 °F or less within 4 additional hours.
-
CriticalFood temperature
Cold food was kept warmer than 41°F, where bacteria can grow.
Official wording (code 02G)
Cold TCS food item held above 41 °F; smoked or processed fish held above 38 °F; intact raw eggs held above 45 °F; or reduced oxygen packaged (ROP) TCS foods held above required temperatures except during active necessary preparation.
-
GeneralFacility upkeep
Fridges or hot-holding units lacked an accurate thermometer.
Official wording (code 10E)
Accurate thermometer not provided or properly located in refrigerated, cold storage or hot holding equipment
-
GeneralFacility upkeep
Non-food surfaces or equipment were dirty, damaged, or made of unsuitable material.
Official wording (code 10F)
Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
-
GeneralFacility upkeep
Non-food surfaces or equipment were poorly built or maintained.
Official wording (code 10G)
Dishwashing and ware washing: Cleaning and sanitizing of tableware, including dishes, utensils, and equipment deficient.
-
GeneralFacility upkeep
Plumbing was missing protection against backflow, or floors didn’t drain properly.
Official wording (code 10B)
Anti-siphonage or back-flow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly. Condensation or liquid waste improperly disposed of.
Inspection history
2 inspections on record
-
A 12 points (A range)
Cycle Inspection · Initial Inspection
2 critical Show violations
-
CriticalHygiene & sanitation
Surfaces that touch food weren’t properly washed and sanitized.
Official wording (code 06D)
Food contact surface not properly washed, rinsed and sanitized after each use and following any activity when contamination may have occurred.
-
CriticalFood temperature
Cold food was kept warmer than 41°F, where bacteria can grow.
Official wording (code 02G)
Cold TCS food item held above 41 °F; smoked or processed fish held above 38 °F; intact raw eggs held above 45 °F; or reduced oxygen packaged (ROP) TCS foods held above required temperatures except during active necessary preparation.
-
More in Lenox Hill-Roosevelt Island
Source: NYC Department of Health and Mental Hygiene (DOHMH) open data, refreshed hourly. Last inspection 6 months ago. Always confirm with the official record.